Re: tire rubbing
Been done there and done that.
Skill level 3c. I.E. three bananna problem.
If your comfortable with working with your hands heres the deal.
Pop off the wheel and have car safely raised.
Get a heat source, heat lamp or my favorite FIRE a propane torch and warm up the offending part. GENTLY AND SLOWLY, NO HOT JUST WARM WARM LIKE 150 DEGREES LIKE HOT COFFEE.
When warm, grab a big towel that is DRY and push the part into shape and hold with your hand till you GET TIRED. When tired, you can take the towel down to examine the results.
Were talking about the black flimsy fender shroud assembly, just to be sure that were on the same page.
I did this to get more clearence for the tires while autocrossing. Enjoy and let me know how it works out.
BEE SLO AND DONT RUSH IT OR OVERHEAT IT you can do it more than once if you want more CORRECTION>
Woody