Thread: Installed a Code 3 intake and code 3 Pulley (GAINED NO POWER)
View Single Post
Old May 18, 2010 | 12:12 PM
  #28 (permalink)  
BrianBrave's Avatar
BrianBrave
<--- Huge Horsepower
Joined: Apr 2007
Posts: 3,217
Likes: 3
From: So Cal
Default Re: Installed a Code 3 intake and code 3 Pulley (GAINED NO POWER)
Originally Posted by BLKFIN
You guys are all crazy....

The issue is no tune. I ran a 12.3 with tune, Code3 pulley and code 3 filter. Ran 12.2 with the code 3 filter off and needswings on. BikeCop ran the same 12.3 if I recall. I put the code 3 filter on a stock SRT6 and it picked up .2 on back to back runs. GET A TUNE!!!!
+1

With plenty of sample data passes for reference - it would be interesting to see the net gain / loss when swapping out the Code3 pulley with the OEM pulley (with tune and "any" intake mod) then making a few passes.

 
Reply
0