Originally Posted by jmswllms
The transmission limps because the computer is measuring a significant diffrence in the rotational speed of the front and back tires.
Do you think it would be simpler to either put taller tires on the back or shorter tires on the front?
i think the tranny is measuring the speed of the in and out of the tranny,, as i put 305 50 16 on the rear and the car ran ok (srt 6 rear307) at 80 i was doing 4500 rpm and punch it the tires would let loose,, doing the math this equaled 317 rear ratio, that is when i put the limited 327 ratio rear into the car, the cel says 3 gear transmission ratio incorrect,, don't forget on a dyno the front tires do not move. jim