Thanks Max, Any way you could send me a link to ones that do not blink? Also i took a multimeter to the map light socket. The outer two are grounds and inner two are power. So:

X= Ground
O= Power
R = Where to place each resistor

[ X O O X ]
|__| |__|
-R----- R-


However on the second R, I could not get the resistor to become hot. I used the same 25amp resitor that can is used to keep the license plate lights from sending a bulb out icon. When i placed the resistors the first R was hot, but it had no affect on anything. What would be the best solution to stop this. Im very **** about small stuff like this lol