View Single Post
Old Aug 14, 2010 | 12:02 PM
  #17 (permalink)  
livefreeordie's Avatar
livefreeordie
Joined: Aug 2010
Posts: 24
Likes: 0
From: dallas,tx
Default Re: No Start. RCM IS NOT MY PROBLEM

Looking at the manual I don't see that the SRT's have a clutch interlock switch thats only on the manuals which is expected. It looks like power goes from ignition switch then "Y's"off to the pulse module and to PCM pin 25.

I'd like to know the location of this pulse module looks like I can test starter solenoid out put from there
 
Reply