Thread: A very hard noise to describe
View Single Post
Old Aug 26, 2010 | 12:01 PM
  #15 (permalink)  
Cissy's Avatar
Cissy
Forum Regular
Joined: Sep 2005
Posts: 666
Likes: 0
From: Bay Area, California
Default Re: A very hard noise to describe
Removal of Air Switchover Valve

1. Remove the glove compartment (you already know how)

2. Disconnect the vacuum lines (1) from the recirculation switchover valve.

3. Disconnect the recircluation switchover valve harness connector from the recirc switchover valve

4. Remove the recirc switchover valve.

Of course, to replace, reverse procedure. They make it sound so easy! I hope this is what you were referring to.

 
Reply
0