Originally Posted by skyking
Boy, I hope no one comes down on me the way my last posting on tire pressure sensors. When replacing the oil filter torque the oil filter housing to 18 ft. lbs. For all those who think their smarter than me all of my numbers and proceedures are from diyalldata.com, the only manual I was able to purchase for this vehicle. I hope this helps. If your trying to out smart me, then you are an eliteist know it all who knows better than the manuals. Everyone, do yourselves a favor go to sears an buy yourselves an inch pound torque wrench in addition to a ft lbs Wrench.
There was only one reply to your posting about tpms, and it was not in any way a negative or derogatory comment. I don't know what your problem is, but you can post facts on here without being a ***** about it. Who on here is being an elitist know it all? Since you are telling others to do themselves a favor, I will return the favor. Do yourself a favor, and chill the **** out!
And, just how smart do you need to be to read a manual? Plus, if you were really smart, you could have gotten the same information from the Crossfire Service Manual on page 7 - 797 which is a free download on this site along with all other Crossfire manuals.
From the Service Manual:
3. Install the filter and cap (1). Tighten to 25 N·m (18 ft. lbs.).