Keep in mind the teflon coating on the blades in supercharger will not last long if your putting anything not gaseous through it.

Will putting anything liquid through it stop the supercharger from working? No, but it will strip the teflon coating off over time and once that happens it reduces the effiency of the supercharger.

As far as cams. The shrick cams were ment to improve N/A setups not boosted applications. My suggestion would be to call a few cam manufacturers and give them the specifics of our stock cams inform them your pushing XX psi through 3.2 liters with a 1.6L twin screw setup and see if they can make any improvements on the cams.


*edited* god i need to proof check my grammar and spelling better!