Thread: Rotors - Brakes
View Single Post
Old Oct 22, 2010 | 12:11 AM
  #4 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Rotors - Brakes
Originally Posted by JHM2K
Steve can chime in with the exact numbers, as he just helped Jason (goodgenes79) with his brakes this weekend.

To answer your question, yes there is a minimum thickness but it takes a lot of abuse to get there
Minimum thickness is;
Front - .890"
Rear - .300"
Material has to be machined off approximately evenly from both faces.
 
Reply
0