I have a pair of freshly powdercoated gloss black 13.7lb(each) 16x7 34 offset forged rims for drag racing and a complete set of two 16x7 forged and two 17x4 steel wheels powdercoated in gunmetal grey metallic. I am selling the rims only(NO TIRES or lug bolts). Every wheel was recently chemical stripped, bead blasted and then powdercoated completely to prevent future corrosion. All wheels bolt right up to a stock ride height Chrossfire(with proper lug bolts) without any spacers or clearance issues. I have not tested the front skinnies on a lowered car and cannot guarantee fitment on such a vehicle. There are no bends or cracks on the wheels but they are used rims so there was typical corrosion on the bead area that was blasted clean and powdercoated and will have no issues with the bead(s) seating properly. I am asking $320 plus shipping for the black pair of rears and $520 plus shipping for the set of 4 grey rims. If you want the least amount of rolling resistance possible, lightest weight for more power to the ground and less strain on your drivetrain this setup is the one for you. The pictures don't do the gunmetal grey the justice they deserve.......