Well Paul and I got my car together tonight and I'll be damned if I didn't shell out yet another diff and on top of that, I destroyed the driveshaft too. WTF Never seen a driveshaft fail like this. It looked like it was spun on a loom. I'm not sure who is more p*ssed right now, me or Paul. We spent 4 hours putting the drivetrain back in my car and now it all has to come out again. I think that is what makes me so mad about it. I didn't even get 5 miles on it. Tow truck driver couldn't have been a bigger *sshole either even if he tried. Wasn't able to comprehend putting the car on the flatbed backwards so we could unload it on the lift so now it's facing the wrong direction. Bring out the very much hated wood blocks so I can get underneath the car. F*CK MY LIFE!!! Well this is just a great finish to the year I guess. Think I'm gonna pull the diff, zip tie up the axles and call it a day until spring. At least I don't have to pull the engine and trans. That would really just make me ripe. So depressing considering I missed the whole start of this year because of diff problems, missed everything after the dragon because the trans connector nut on the f'n cunductor plate in my car decided to take a dirt nap so the trans connector leaked so bad the fluid would almost run out of the trans as fast as you poured it in and now that we get it all put back together, another diff AND a driveshaft. Guess that's what happens when you try to make these little SSB's a little quicker.

On a positive note, we hooked the V-box up to Paul's car and bone stock with no go-fast mods, it's quicker than an SL65! Just wait till we start tinkering with it...

Guess it's time for bed, maybe I'll wake up and this was all just a really bad dream.