Thread: Brought the baby home!!!
View Single Post
Old Nov 16, 2010 | 09:45 PM
  #11 (permalink)  
Valk's Avatar
Valk
Administrator / Senior Member / Retired
Joined: Jul 2007
Posts: 18,102
Likes: 1,594
From: Aurora , ILL
Default Re: Brought the baby home!!!
Originally Posted by TiredRetired
Funny, after purchase the service prompt came on at the milage indicator.
The owner had no idea what it was, but I had a hunch so no concern there.
I need to study the book to see how to reset. It's the two wrench icon.
Congratulations and here is a little help resetting that FSS.....

RESETTING THE FSS MAINTENANCE INDICATOR

1 Move the ignition switch to the “RUN” position

2 Within 4 seconds of moving the ignition switch into the
“RUN” position, press the reset button for the trip odometer
twice within one second The display for the FSS service
request is activated for 10 seconds

3 During the 10 seconds the FSS service request is displayed,
move the ignition switch to the “OFF” position
The FSS service request will continue to be displayed

4 Press the reset button for the trip odometer and hold

5 Move the ignition switch to the “RUN” position

6 Continue to press and hold the reset button for the trip
odometer (about 10 seconds) until the audible signal
sounds and the new start distance appears in the display
The tool symbol should disappear at this time

Just read it thru several times before doing the reset It sounds more complicated than it really is
 
Reply
0