[QUOTE=oledoc2u]Well, in some ways, it seems like that here....so here goes my friend. I would start with a cold air intake of your choice...each over here have their own favorites, but this is where I would start. Then a pulley of your choice, again your choice Code 3 supercharger pullies are hard to find, but people sell them on here from time to time, so the next option is a crank pulley which are available. These two things alone will get you ahead of the pack, but you will have to pull them together with a tune. You can pull the ECU, and ship it to a tuner, they will flash a canned tune, or if you have some data logging as to how the car is running, they can take that into account, and do a custom tune. Then they will ship it back. Put it in, reset the throttle, and away you go...this is the simple explaination...they are a whole host of other mods you can do, and just reading thru all the threads, rearend, cooling, meth injection, it's all here...good luck[/QUOTE
Thank you very much! Now I can start ! And I'll try to find c3 pulley. Crank pulley I could buy from nw?