View Single Post
Old Jan 10, 2011 | 03:05 PM
  #63 (permalink)  
Bill F's Avatar
Bill F
Senior Member
Joined: Nov 2005
Posts: 2,349
Likes: 8
From: Schertz, TX.
Default Re: CTC and HAXFD GTG Jan 15.

Thank you to those who have responded one way or the other. Those that haven't. . I hope the weather holds out, there is a 40% chance of rain, if it doesn't, I'm willing to get my garage queen wet and dirty to socialize with you all, I hope you all do too.

THE PLAN
Meet at the Murphy's Steakhouse eatatmurphys.com at 12:00 Saturday Jan. 15, 2011. After we are done at the restaurant, a road trip to
The Sterling McCall Historic Cadillac Museum

THE LIST

CTC


1. Bill & Sampie

2. John & Eileen

3. Tom & Suzanne

4. Paul & Reeca (maybe)

5. Ron & Barb

6. Cameron

7.
Lenn & Mary

8. Robert & Lorraine(unsure)

CTC members and non members who want to meet at the HEB in Schertz off FM 3009. We'll depart for San Marcos at 9:30. Anyone who would like to meet up with us in San Marcos at the Dairy Queen off TX-80 on the right, we should becoming through there around 10:15 in route to Winchester to meet up with the HAXFD.

HAXFD
1. Dave & Carmen

2. The Beep

3. Terry & Margaret (& Buddy)


4. Glenn

5.
ShaunXFire

6. magredvet

Meet at the McDonalds in Hempstead at 9:30. It's far enough out of town where traffic won't be an issue. The address for those with Nav. 2100 FM 1488 Road, Hempstead, TX 77445. Hempstead is about 1/2 hour up 290 from the beltway. WATCH FOR THE HEMPSTEAD EXIT! 290 curves to the right and over a hill and the exit is RIGHT THERE. There's an Exxon fueling station next door by the freeway. It's about 1hr 15min from Hempstead to La Grange and maybe another 10-15 minutes to Murphy's in Winchester.

DFWXfires
1. Eric (if you are by yourself, I include you in the CTC list)

2. Danny & Sonia

Meet CTC at the Dairy Queen in San Marcos off TX- 80 around 10:15 in route to Winchester.
(Socializing, Showing our cars, Having fun and Making friends)
is what this is all about. Any Crossfire owner is welcome to join us.

 

Last edited by Bill F; Jan 14, 2011 at 08:52 AM.
Reply