Originally Posted by MikeR
Nope.....
I just re-did both sides on the Aero yesterday. They were leaking again and when I pulled the breather covers the gasket was stuck very well to the breathers but not to the valve covers.... so I made sure that I cleaned both really good again and used naptha on the valve covers to get all the oil off.... then I used a little(?) extra RTV material to make sure I got a good 'squish' on the bottom sides where they always seem to leak..
After seeing this above, I performed an inspection of my breather covers yesterday. No sign yet of the oil leak resurfacing. It's been over 7 months since I did the original repair. I did use a different RTV compound than
MikeR reported originally. Will continue to watch for any recurrence of oil leak. It would be good for all if we could identify a preferred gasket maker compound for this repair.