View Single Post
Old May 4, 2011 | 07:43 AM
  #5 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: key in ing chime and door lock questions

Originally Posted by green-ghost
The fob works ok, its just that when I turn the car off the darn thing starts beeping at me and when I open my door to get out the trunk and pass door stay locked. Just thinking its because my door panel is still removed and something may not be connected for now.
Read my post, the fob can be programmed to open ........

Instructions.
Press both lock and unlock buttons at the same time and hold them down until the red light at the top of the key fob blinks twice. Repeat this operation and the change to the programming is undone.

My beeping only starts if when I open the door with the key in the ignition as Bluecoupe says above as well.
 

Last edited by onehundred80; May 4, 2011 at 08:19 AM.
Reply