View Single Post
Old May 6, 2011 | 12:18 PM
  #9 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: key in ing chime and door lock questions

Originally Posted by green-ghost
OK got the fob to flash twice. Still having issues though. Again when I shut car off it starts to beep at me (its supposed to do this when I open the door with key still in ing) The doors all stay locked even when I open my door the hatch and pas door stay locked, dome light doesnt fade out either. I read theres a chime generators located throught the car and one is in the door in close proximity to the latch/handle I just had issuse with last week.

Im thinking the door chime thingy is thinking my car door isnt closed or just messed up. I see where the vacum airline goes into the latch as well as some whires seem to plug into the top portion of the latch, by the door pin that pops up. I dont know what these wires do as the tech at work buttoned it all in when he fixed my lock/latch mechinism deep inside the whole latch assembly. Anyone whos taken one of these apart knows what I mean...its a metal roller that causes the door handle to shut after you open the door...mine was all jamed up and my door handle went inop due to this roller assembly located within the latch assembly.

So can anyone tell me what the afore mentoined wires to the latch are for?
I have had the door panel and the plastic membrane off and I have looked at the photo and can see no wires to the lock area, only the pneumatic tube.
The manual does mention wires to that area. These wires are not in Euro versions, but NA cars have them and are for "driver cylinder lock switch', but I cannot see them in the photo below.
 
Reply