View Single Post
Old May 10, 2011 | 11:50 AM
  #24 (permalink)  
amx1397's Avatar
amx1397
Senior Member
Joined: Apr 2008
Posts: 6,723
Likes: 463
From: Indialantic Fl./blairsville Ga
Default Re: SRT6 Rear End Removal - Short Cuts?

I personaliy have not pulled the rear end from my crossfire so i can't help much there ,,,,Rudy is the person to go to for info on that ,,now on this::
Quote:
Originally Posted by MikeR
Jonnyb, there is a SRT differential at LKQ in Birmingham for $350. Here is the link I used to find it..... I got one with 11K miles for $375 in SoCal and they drove it over to Unitrax for me...

Search Results


Please post your pics and how to.....



Be really careful with LKQ. I just tried to buy some parts based on their computers interchange and when I had the guy pull the part and read the part number (2004 E55 ECU) I stopped him after after the first three digits which were 112 so the ECU was for a V6. He tried to convince me it would work in a E55. He didn't have a clue. I am not sure you can tell a n/a from a SRT from the case number since the only difference in the rear ends is the gear ratio. also the limited comes with a small yoke on the rear end, where as the srt comes with the big one ,again Rudy can give us the size, of the two yoaks. jim
 
Reply