Originally Posted by James1549

Guys, as some of you know, recently I purchased the Mopar Performance Exhaust system that is exactly like, and manufactured by Borla. This system uses two mufflers, one before the axle (like the SRT6) and one at the rear outlet. Also it is a two piece system. The system was barely louder than the stock system. I would have been very disappointed with this system had I paid retail for it. But since I paid about 1/3 of the cost from a closed Chrysler dealer, I was going to make the best of it.

Anyway, I removed the most rear portion of the system, replacing it with a tail pipe and tip as shown in the pics. The mod can be unbolted and made whole again in about 15 minutes with NO modification. The system sounds great around town, above 50 mph the sound goes away which exactly how I like it when traveling.





John, I don't see a problem using this tip with a muffler if you have a good exhaust guy. The tip can be cut short and welded directly to the muffler. The tip can work if your muffler guy is willing to take the extra effort. The longer I have this tip on my car, the more I like it. Currently I am looking for three small pieces of METAL stainless or chrome door edge guards to put on the 3 dividers in the tip. I tried plastic and it looked awesome. Once around the block they melted into a mess!!!

Good Luck and thanks, James