CrossfireForum - The Chrysler Crossfire and SRT6 Resource - View Single Post

#41 (permalink)

05-23-2011, 11:19 PM

Valk

Administrator / Senior Member

Join Date: Jul 2007

Location: Aurora , ILL

Posts: 17,194

Likes: 9

Received 503 Likes on 346 Posts

Re: Disable Seatbelt Alarm - No cutting any wires

Quote:

Originally Posted by Thomas B. Whyle

The procedure for the Crossfire is as follows:

1)Turn key to ON/START - within 60 seconds, turn ignition OFF and fasten the driver seat belt.

2)Start engine and wait for the seat belt light to turn off.

3)Within 60 seconds unbuckle/rebuckle the seat belt 3 times - ending with buckled.

4)Turn the engine OFF and wait to hear a single chime.

(This confirms you have turned the repeater chimes off. Repeat the sequence or disconnect the battery to restore the reminder function.)

Thanks to someone who read this thread previously I now have a disabled seatbelt alarm

Thanks to Thomas and the person who told me about this simple fix and did it for me this weekend !!!

Reply Like