Recently I decided to try a new design with the pod to make mounting a little easier. The new design uses the stock A-pillar, so it snaps into place after the factory A-pillar is removed.

In order to make this new pod, I had to first buy a new oem A-pillar from Chrysler. I then attached and double gauge pod to the A-pillar and blended the two with bondo. Next I had a local shop professionally finish it.


2011-05-28_16-44-54_366.jpg

2011-05-28_16-42-19_816.jpg

2011-05-28_16-42-37_631.jpg

2011-05-28_16-42-12_197.jpg

2011-05-28_16-42-02_276.jpg