~~~SOLD! Thanks for the interest! Way to represent SoCal guys!~~~



Had to smog the wifes SRT-6 yesterday so i had to take the intake off (Frickin retarded *** California). Planing to sell the SRT-6 real soon so I really have no desire to put the intake back on. It really only takes 10 minutes and a flat head screw driver.

Initially it was a polished chrome, I hate that bling look so i sand blasted it down then through some soft grey rattle can on it. I'll gladly re sand blast it but you gota make it worth my time.

Made 310 hp / 310 tq with ecu shutting down at 5700 RPM HP was climbing super strong so there is pleanty of power above the 310. I did a lower gear pull to redline and got 331hp. Sounds wicked loud at WoT but you already knew that...

If you are local in Orange County California By all means swing through to pick it up and I'll install it.

Also I cleaned the filters with K&N's cleaning kit about 600 miles ago.

I'll include all the coupling options so you can pick what you prefer.