Thread: Opening Convertible Top
View Single Post
Old Jul 12, 2011 | 04:07 PM
  #8 (permalink)  
IBLUBYU's Avatar
IBLUBYU
Senior Member
Joined: Mar 2010
Posts: 1,363
Likes: 2
From: Sun City West, AZ
Default Re: Opening Convertible Top
Originally Posted by Kane
If I'm anticipating the top to be at half mast for any period of time (to change tail light bubs, whatever) I keep the rear end of the top propped apart from the tonneau panel with a short length of wood cut to size. If the top is allowed to droop down, the possibility exists for the sequencing to get out of whack upon power up.
can't answer the out of sequencing query for sure .....I believe the sequence is computor controlled and will restore. BUT I'd be very careful about bracing the top up with anything braced on the toneau. The top may have too much weight when relaxed and possibly bend and deform the toneau. Just my $.02 worth ..... Again, someone will add to this ..... just be patient
 
Reply
0