Originally Posted by gurudog
----
Just too easy picked up exactly the tool you suggested...so now I can yank out Infinity radio with no alarms going off; clean terminals and re-install??....or does all hell happen when I take it out...?
Slightly paranoid after reading directions (never read directions!?) about some radios are "Code Protected"....also radio is getting worse on sound so my tiiming is good...if I have blown up radio all together...suggestions on an easy replacement with cd that fits cfire well?
Jeff
Just changed mine out a couple weeks ago. No alarms, no codes / programming issues......... should be a piece of cake. Hardest part was getting the antenna wire off. Look closely at the catch on the plastic connecter and make sure you are pinching and pulling correctly. Everything else was plug and play............and very easy.