View Single Post
Old Sep 23, 2011 | 07:59 AM
  #16 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Question for the North

Originally Posted by mdaniels4
Interesting. that means there should be a readily available MB P/N somewhere. I'll bet they also have that for the regular MB cars available in northern Europe too. That would make sense to me.
Go to this thread and look at the post by Rudy (post#4) and you will find the part numbers for all the parts required.
https://www.crossfireforum.org/forum...tml#post566753
In this photo you can see the block heater, it is installed in that elbow (part of the heater assembly), the heater (the brass part with the red mark on it) and the cap that covers the heater terminals where the heater cable plugs into.

Here is the the heater and the heater cable, do not buy these from Chrysler as they will cost you a small fortune. Look on line they are much cheaper when you find them. There are links in another thread I think, or at least some prices. The cable was not supplied with the Canadian cars but the heater assembly was. I would think that cars in the Nortern States came with a heater assembly as well.
 

Last edited by onehundred80; Sep 24, 2011 at 11:04 AM.
Reply