Thread: 181 Pulley kit On - Problem cutting out at 5K
View Single Post
Old Nov 5, 2011 | 09:05 PM
  #24 (permalink)  
rtmopar85's Avatar
rtmopar85
Joined: Oct 2011
Posts: 103
Likes: 0
From: Cohutta, GA
Default Re: 181 Pulley kit On - Problem cutting out at 5K
IAT's are fine. Running a few degrees higher with the new pulley (more boost, but only 25-30 degrees above ambient. 90-95 degrees.
 
Reply
0