The course was actually one of the most technical courses we ran all year. Of all the drivers, only 1 had a clean run all 8 runs.

My setup is:
Front camber bolts (-1.7), Rear camber arms (-1.8)
Front Toe out 1/4" total, Rear Toe in 1/8" total
Straight pipes from just behind the Y-pipe
Hankook Z214 C71 245-40-18 with 1/4" spacers up front 34 psi cold
Hoosier A6 235-35-19 in rear 35 psi cold
Always do a throttle reset before each race.
All else is stock.