View Single Post
Old Jan 4, 2012 | 10:36 AM
  #14 (permalink)  
ala_xfire's Avatar
ala_xfire
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Talking Re: Changing wheel size

Originally Posted by onehundred80
I'm talking about a measurement over the wear bars and not to the bottom of the tread. If the wear bars are flush with the surface they are long gone.

If you have that over the wear bars you have driven it like a little old lady, so I doubt the size is over the wear bars.

The Michelins PS 2's on the rear of the SRT are shot as well, they were down to the wear bars when I got it at 19,500 miles.

Don't look at the outside tread area, look on the inside that's where the most wear takes place.
I bought it at 42,000, and it was in fact driven by a little old lady lawyer to the office each day, all highway miles. And I AM talking about tread above the wear bars, so impossible as it might seem, miracles do happen
 
Reply