Old Mar 10, 2012 | 01:48 PM
  #1 (permalink)  
WestKyOnXFire's Avatar
WestKyOnXFire
Joined: Mar 2012
Posts: 36
Likes: 0
From: Western Kentucky
Default Lots of trouble going into Reverse, need some help

To open up, this is my first post. I bought an '04 Crossfire 6-speed, low miles yesterday. My only problem with the car is that at times I have a tremendous amount of trouble going into reverse. I realise the lift up, left-back idea, but still, after driving somewhere, parking and coming back out, it is a pain. I have checked the TSBs and Tech forums to no avail, none seem to address my exact situation. Any thoughts/suggestions would be greatly appreciated.

PS I have no trouble getting it in reverse after it has set through the night.

Edit: After realising I didnt explain it very well, here is my issue. I pull up on the ****, left and back, but then nothing. I can yank, heave, tie the **** to a rope and the rope to a horse, and it still wont go into gear (slight exageration for effect). But eventually with some wiggling it will just drop in.
 

Last edited by WestKyOnXFire; Mar 10, 2012 at 02:00 PM.
Reply