Sorry for no updates been busy lately and have not messed with it for a while. Last weekend I pulled the spring out on the passenger side to change the spring pad but the dot 3s I had were fronts not rears. Ordered the rears and got em on Wednesday. Hope to get those on today after work or tomorrow to see what happens. My thoughts are raising the body up a little will mellow out the angle of the camber arm and provide a bit more of a gap between the sway/camber, hopefully enough. Looking it it again last weekend I am still getting body contact on the sway as well. If this does not give me enough room I will have to do the Les notch on the body to see what happens. I am pulling pretty hard to the left after all this playing so will need to find an alignment place as well but want to get it right first. Front could be the issue there though as I don't think the dealer did a propper front end after replacing my ball joints a while back.