View Single Post
Old May 14, 2012 | 05:30 PM
  #8 (permalink)  
JesseJamessrt6's Avatar
JesseJamessrt6
Senior Member
Joined: Jan 2012
Posts: 1,098
Likes: 0
From: SouthTX
Default Re: Help with IC pump

I had my lower fender well skirt off and it looked like it would come out without too much grief. Sounds like I am wrong and I am tagging along here as my replacement pump shows up in about 5 days.

When I had the headlight housings out to install my HID's I saw where the pump bracket would be impossible to get out without removing the headlight assembly but thought the IC pump didn't need that removed.....

I ordered a johnson and everyone on MB world said it is slightly larger in diameter, should be interesting once I get into it by the sounds of it.

Good luck and keep us posted, thanks!
 

Last edited by JesseJamessrt6; May 14, 2012 at 07:40 PM.
Reply