Old May 24, 2012 | 04:32 PM
  #8 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Default Re: How to test Crossfire 05 fan relay? Coolant light ON, fan not working

Originally Posted by pizzaguy
Won't do him/her any good. The procedure is to connect the diagnostic thingy and command the fan to come on. I BELIEVE the tool also has a communication test to the FCM, but again, without that many-thousands-of-dollar tool, the only other way to confirm it is to trade FCM's between cars.

Good reason to have two Crossfires. You could loan them your FCM , since it is still winter where you are.
  1. Well that's not quite true, after step one, which has the DRBIII simulating the BCM I believe, you go to step two etc and these test for volts and amps.
  2. The DRBIII checks the BCM and if that's OK you get the multimeter out.
 
Reply