I installed the 10LB Cry02 tank last night! I installed it on the aluminum Fuel Tank cover, in the back seat. I put the bolts right on the "lip" of the circular cut out for what I'm guessing is the gauge assembly. There was plenty of leeway! Here are some pictures to show how clean it is.

I ran the 14' Steel Braided Hose through the interior of the car, through a little hole on the drivers side. There was a plastic cork in there which I popped out and sliced a (+) shaped opening into, so I could run the hose through it while still maintaining a level of waterproofing for the firewall.

Here is the tank fully mounted with interior reinstalled.

Cry02TankMounted.jpg

Here is what it looks like behind the seat where the line runs under the carpet.

cry02seatclean.jpg

Side of the seat.

cry02sidepanelclean.jpg

By the Pedals.

cry02pedalclean.jpg

This is up under the console, where it goes through the firewall from the inside.

cry02consoleclean.jpg

This is where it comes out of the plastic grommet in the engine bay.

cry02engineclean.jpg

Here is a bigger view of the engine bay and how much slack I have on the hose left.

cry02engineclean2.jpg

My car is dirty, getting a steam clean soon. I get my intercooler sprayer, timer, chill charger, water sprayer and intake cryogen chamber tomorrow in the mail. Will post more pics when it's all completed and a video of how it works!!!!!!!