Originally Posted by
sk8erjosh09
You want to do it this way for front and rear.
On the amp.... Pin 7 (yellow) is Front right positive... Pin 10 (yellow) is Right sub positive.... Pin 6 (yellow/Violet) is Front right negative... Pin 9 (yellow/violet) is right sub negative... Pin 1 (Blue) is Left front positive... Pin 8 (Blue) is Left sub positive... Pin 2 (Blue/Brown) is Left front negative..... Pin 3 (Blue/Brown) is Left sub negative...
OKay, SK I am going to do it your way to get the front and back control. But for a novice your way assumes a lot of knowledge on my behalf. I need guidance for dummies. Being told pins and wires and to figure it out from there after looking at diagrams is simply over my head.
SK since I am following your lead, please give me step by step guidance, if you do not mind. You know I have the 4 yellow wires cut, please tell me what to do from there to get the complete control you reference. Do you want me plugging wires int the amp or what?