I wanted to update with some info and picture.

This is Rob's (Needswings and Waldig's) pulley saver kit part # paskc3 for smaller super charger pulleys. details are here;
http://www.needswings.com/Pulley-Sav...ngs-pskc3.aspx

This kit had the 100mm ribbed gates pulley, the two smooth 100mm gates pulleys, AND a 90mm gates idler pulley option (if you have a stacked set up with a larger crank or possibly the EC'd 65mm SC pulley). Rob included the 90mm option and I am passing it along. I used both smooth 100mm pulleys, not the 90mm pulley for the 62mm Karmen SC pulley from Rudy.

The "L" shaped stainless bracket, bolts, and spacers are all included. I will also e-mail the installation instructions with diagrams that were e-mailed to me when I bought the kit.

All the pulleys and belt are in great condition and the entire kit was used for only 1,000 miles. I am not in a hurry to sell this and would have no problem leaving it on my extra parts shelf so please don't PM me asking to ship it to a far off place at a low balled priced. I can do $160.00 shipped within the continental U.S.





Before PSK




After the PSK