Old Apr 17, 2013 | 01:33 AM
  #6 (permalink)  
Wedge's Avatar
Wedge
Forum Regular
Joined: Nov 2007
Posts: 567
Likes: 0
From: Santa Rosa California
Default Re: Track/autocross sway bar setup question for you track guys?

I haven't gotten into the sway bar aspect of things yet. Still dealing with a big learning curve in general.
What I've done suspension wise so far is; Kmac camber bushings (don't have the alignment #'s with me as I'm out of town), Koni adjustable yellow shocks (Front-full turn out from full hard, Rear-full turn out from full soft. I got these settings from Les, may not be his current settings 'tho), SRT stock springs in front with a 1/2 coil cut/removed, Eibach's in back. Mike R camber arms.
At my last autocross event the car went through sweepers the best I've ever experienced. I have to re-learn how to drive it again. I was going through a sweeper thinking, "the front end's not pushing...damn...oh ****! Go faster! " lol. It actually felt like the rear end would break loose before the front pushed.
 

Last edited by Wedge; Apr 17, 2013 at 01:35 AM. Reason: spelling, adding clarity
Reply