View Single Post
Old May 6, 2013 | 05:42 PM
  #11 (permalink)  
PAULW's Avatar
PAULW
Senior Member
Joined: Mar 2006
Posts: 1,586
Likes: 3
From: Austin, Texas
Default Re: Accelerator Pedal Fault - Non Response

Hey guys,
I had some issues where my car would go into limp mode, usually if I was in a hard acceleration (but a few times just normal driving) and I could cycle the power and the pedal response would return. I removed the SB and that wasn't the issue, it turned out to be the TPS (accelerator pedal assembly). From what I am reading I will bet that is yall's issue also.
 
Reply