Scott: Thanks for sharing.

I did a stock dyno run a year ago before any mods were completed. The shop I used was "Sevens Only" a Spec. Miata race shop at ButtonWillow Raceway. We did three pulls with AFM ratio to get a baseline of the "off the shelf car". I have not had the chance to get back there since the mods. were done...

PS: I mis-spoke in my earlier post, I meant to say the car is running very RICH... I can see it from the blackened tips, and smell the un-burnt fuel in the exhaust.

Either way, I need to get my hands on the software/hardware that will allow us to make adjustments in the shop.