View Single Post
Old Jun 22, 2013 | 06:20 PM
  #45 (permalink)  
MoparFreak69's Avatar
MoparFreak69
Forum Regular
Joined: Jan 2012
Posts: 787
Likes: 1
From: Boise, ID
Default Re: Nitto INVO users... feedback needed!!!

Got them installed today. $130 to mount and balance them. While they were in there I had them take put my dead TPMS sensors and install plain ol steel valve stems.

Initial thoughts, great looking tires. Very quiet. A bit greasy initially until you get the shipping coating worn off. I can still get the traction light to flash if I try, but normal driving they are sticking quite well. The KDW's I took off the back definitely broke free more easily. Braking traction, once again a bit greasy at first til coating worn off. I can get the ABS to cycle by pressing the pedal very firmly (not jamming them on). Initial feel seems better than the Toyo's that I took off the front.

Anywho, a few pics, excuse the dirty car
F3CDEA6C-8CB7-4DCD-91C3-FFBF74FB9C70-21793-000020E1BA7055FB.jpg

2EE89DAF-704F-4492-81B6-CD325D9D4738-21793-000020E1AFFBCB8F.jpg

AEB2920B-3399-46BC-BB70-267E34115BA5-21793-000020E1CC4F0B63.jpg

Will update more as I put more miles on them.
 
Reply