View Single Post
Old Apr 7, 2006 | 09:13 AM
  #16 (permalink)  
aschrager's Avatar
aschrager
Senior Member
Joined: May 2004
Posts: 881
Likes: 3
From: The Villages, Florida
Default Re: Be careful during XF FUELING...

I have also tried it and found it very hard to get good results. I just tried it two weeks ago and had no good results. I tried using it many different ways. I then filled the chip with paint again and used polishing compound till it was down to the level of the paint. That worked pretty good.
 
Reply