Hi everyone,

Finally the Black Series project is done regarding the engine mods. We are now putting down 366whp. The picture shows the run(356whp) before we got to the 366 numbers. The dyno that was used was a Dynomite dyno which is a load bearing dyno where the numbers are about 13% lower then for example for the Dynojet.

We are very pleased with the result and after about 10 hours of work we have reached the maximum numbers of 366whp.

The following mods was installed by the help of Rob at Needswings:

- 61mm eurocharged SC pulley
- Custom manifold
- 90mm throttlebody
- Custom made intercooler, 3/4" inlet and outlet
- Supercooler
- Separeted intercooler coolant
- Catch can
- DCAI which was remaid to fit the 90mm throttle body
- Cutout downpipes
- CM90 intercooler pump, 17GPH
- Increased the valve ventilation
- Increased the RPM limiter to 6800rpm
- Increased the torque limiter
- Finetuned the TCM for holding the gears in the higher revs
- SL55 pump
- AEM fuel pressure regulator
- 550cc TTM injectors
- Closed loop fuel rail

The result is fantastic, no dip in the AFR, no dip in the fuel pressure, no dip in the air flow.

Even after 8 hours of hard testing on the dyno the engine stayed so cool that my mechanic was wondering about the secret under the SC

Many thanks to Rob who has helped us with this project