Thread: Coupe Cargo Cover - Roller and Shade - Wanted
View Single Post
Old Dec 29, 2013 | 08:42 AM
  #2 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Coupe Cargo Cover - Roller and Shade - Wanted
Originally Posted by ZH SRT6
There has been a fair bit of wishing in the Forum for a Coupe luggage compartment cargo cover. And Mopar certainly did offer such an accessory, back in the day.

The supplier probably made similar covers for other Chrysler vehicles, probably with similar or identical components, back in the (Magnum?) day.

My 2005 Coupe used to HAVE one of those factory-authorized-but-not-installed cargo covers. Brackets to mount the roller shade and hooks to hold it open are still in the vehicle. But the actual cover, the windowshade part, must have stayed in a former owners garage.

Does anyone have one of these windowshade cargo covers to sell? Or a lead toward someone who might have one?

Thanks,

Clint
Clint
As you know the Magnum cover is similar, back in the day I got the measurements for it and it is a bit short in the length as I recall. The Magnum one clipped into the trunk side panels and did not use the frame but it is about the same width. The length can be extended by moving the rod to the end or using loops, eliminating the flap required on the Magnum. The beauty of the Magnum cover was that it was less than half the price of the Crossfire one, about $120 if I remember correctly. I did a thread on this maybe five or six years ago.
I did see another cover that looked the same on another car, and swore to remember the car, naturally I forgot. You work for Chrysler as I remember and whoever made these rollers probably still does so .......... find out who they are.