Thread: Stalled
View Single Post
Old Dec 31, 2013 | 02:36 PM
  #2 (permalink)  
ala_xfire's Avatar
ala_xfire
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Stalled

If the engine is turning with the starter, but not firing, then replace the Crankshaft Position Sensor with a Bosch replacement.
If you are turning the key, dash lights up, but no starter, then resolder the Relay Control Module ( Mystery No Start ).
 
Reply