Thread: After resealing breather valves, will not fire
View Single Post
Old Jan 7, 2014 | 10:45 AM
  #3 (permalink)  
dtinker's Avatar
dtinker
Senior Member
Joined: Nov 2008
Posts: 1,577
Likes: 1
From: Houston, Texas
Default Re: After resealing breather valves, will not fire
Make sure all hoses are hooked up or plugged, so they don't suck air, make sure you did not unplug an electrical connection. Should crank, but maybe not start. Check battery!!!!
 
Reply
0