Thread: The Official "Sapphire Silver Blue" C-R-O-S-S-F-I-R-E Photo Thread
View Single Post
Old Feb 4, 2014 | 10:06 PM
  #153 (permalink)  
Valk's Avatar
Valk
Administrator / Senior Member / Retired
Joined: Jul 2007
Posts: 18,129
Likes: 1,612
From: Aurora , ILL
Default Re: The Official "Sapphire Silver Blue" C-R-O-S-S-F-I-R-E Photo Thread
Originally Posted by bxpete
service indicator was reading -26K and oil was dirty.

In case you need to know how to reset that -26k follow the directions below and it might take a couple times to get the knack but it does work

RESETTING THE FSS MAINTENANCE INDICATOR AFTER AN OIL CHANGE

1) Move the ignition switch to the “RUN” position

2) Within 4 seconds of moving the ignition switch into the
“RUN” position, press the reset button for the trip odometer
twice within one second The display for the FSS service
request is activated for 10 seconds

3) During the 10 seconds the FSS service request is displayed,
move the ignition switch to the “OFF” position
The FSS service request will continue to be displayed

4) Press the reset button for the trip odometer and
hold

5) Move the ignition switch to the “RUN” position

6) Continue to press and hold the reset button for the trip
odometer (about 10 seconds) until the audible signal
sounds and the new start distance appears in the display
The tool symbol should disappear at this time
 
Reply
0