Old Mar 1, 2014 | 05:34 PM
  #3 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: why does our post counts go backwards (high to low)

Originally Posted by Avantidude
Is it just a setting, because I find it madning to have to scroll to the last page to read the first post. This is the only forum out of the 6 i belong to that is like this. Its is a great forum, before someone blasts me, i have saved a lot of money. I love different cars, I have Studebakers Two Avanti 64, and 84. Two diesel Bugs 98, and 2002. Dodge 2500 4x4 diesel, and a GMC (we wont talk about that one). and all the related forums the post count goes low to high, so when you open it you read the first post, and the last page to read the last post.

Well I hope it is a setting, but ill live with it if it isnt.

I bought my first Crossfire a 2004 limited, 6spd graphite, with 98000 miles for 4000. it was really dirty but after some cleaning, alot of cleaning! She is a keeper. I have done the TPMS mod and need to do the oil level sensor. But my biggest problem is the air con system.
1 Blower motor works on all speeds
2 ac buton on the elec fans run very slow for a couple seconds and shut off
3 elec fans seem to work well, car has not got hot, i use a scangauge II no codes
4 hooked up a bottle of ac charge, presure seemed high, high side of the gauge.
5 checked all fusees, replaced all but the two 50 amp, and the 200 amp

is there a relay?
anyone have a good link to a service manual?
maybe the low pressure switch?
Fan control?


Any help would be appreciated.
Go here (CLICK) for the Service Manual, it is a PDF of the Official Chrysler manual. There are a lot of manuals there so download them as you want and learn about the car.
Also go to the link in my signature it will take you to a thread with many solutions to problems.
 

Last edited by onehundred80; Mar 1, 2014 at 05:36 PM.
Reply