Thread: Blower motor resistor
View Single Post
Old Apr 25, 2014 | 07:27 PM
  #21 (permalink)  
Valk's Avatar
Valk
Administrator / Senior Member / Retired
Joined: Jul 2007
Posts: 18,129
Likes: 1,612
From: Aurora , ILL
Default Re: Blower motor resistor
Originally Posted by syfi
I finally got around to installing both of them about 2 weeks ago and both are working flawlessly.
Would blow full blast until you wiggled the switch and would then settle down to the correct speed.
OK I got the new Blower motor resistor and installed it today.
Took less than an hour but unfortunately it didn't correct my problem with the variable fan speeds.
The fan speed still fluctuates up and down as you turn the fan speed **** from low to high and high to low.
It doesn't seem that the fan speed goes as high as it used to either.
I'm wondering now if it is the fan speed switch itself on the dash
I'm leaving the new part installed anyway but need to investigate further

Any other suggestions are welcome
 
Reply
0