Thread: Blower motor resistor
View Single Post
Old Apr 30, 2014 | 12:01 AM
  #22 (permalink)  
syfi's Avatar
syfi
Senior Member
Joined: Jun 2008
Posts: 1,920
Likes: 25
From: Spacecoast, Florida
Default Re: Blower motor resistor
Originally Posted by VALK
The fan speed still fluctuates up and down as you turn the fan speed **** from low to high and high to low.
It doesn't seem that the fan speed goes as high as it used to either.
Any other suggestions are welcome
Sorry to hear that it didn't do the job Gary. Did you just unplug the old one and use the old connectors? I remember reading a thread where they commented that the connectors on the motor coming from the resistor were corroded and/or oily, and that cleaning the contact points on the motor and using the new wires fixed the problem.
 
Reply
0