Originally Posted by red dog

i'll save you the trouble . . . Here is the pertinent excerpt from the e-mail i sent to you on 12/16/13 . . . I have the whole series of our e-mail communications if you want i can post them all because your memory seems to be defective.

hello austin,

. . . .

I would be a willing buyer at $250.00 delivered. I would just be using the code 3 as a spare back up pulley incase something should happen to my 62mm karmen pulley. If you can do better . . . No hard feelings . . . Go for it. If you want to take my offer let me know and i'll send immediate payment via paypal.

bob davis (red dog)
my indian name means "runs with beer"
24 hours in a day / 24 beers in a case
could that be a coincidence?? - i don't think so!

i did end up reselling the pulley to member s.artee on 1/15/14.

Here is an excerpt of my e-mail to s.artee on 1/15/14 . . .


i'm not sure how many miles of use are on the pulley. I bought it from a forum member who had taken it off to install a 62mm karmen supercharger pulley. With this 65mm code 3 pulley, you will not have to worry about changing out the fuel pump and installing a fuel pressure regulator. I would have a new bearing installed before putting it on. Just take off the oem pulley, and install this one. A tune will further improve performance further.

I bought this code3 just to have a spare pulley incase my newly installed 62mm karmen pulley developed issues . . . I'm now comfortable with my 62mm so i can let this one go . . .

Let me know if you want it.