View Single Post
Old Jul 6, 2014 | 05:08 PM
  #1 (permalink)  
Davidm781's Avatar
Davidm781
Joined: May 2014
Posts: 21
Likes: 0
From: Belleville MI
Default Problem after problem HELP

Okay so I bought my car about two months ago and it has been nothing but problems. At first my car would not stop stalling and running funny (gas pedal not working) going into limp mod.e so I started by replacing the crankshaft sensor. Everything was well for about two weeks car ran fine. One day I was driving and the car started doing the exact same thing but only once it got hot it would run fine cold (still no code). So I replaced the camshaft sensor thinking it may be the problem. started up ran fine for a couple days. Then today I started my car up started to drive and the tow away alarm lights were flashing but it was still running I stopped the car shut it off and ever since on a start it just idles very rough and seems to be in limp mode again the gas pedal won't work.
Getting very frustrated if anyone could please help I am seriously considerig selling the car if I can not figure it out but I don't want to.

A little more info I did not use Bosch sensors when replacing the CPS or camshaft sensors I know I should have. Almost thought maybe that may have been why it only ran good for a couple of days but I can't imagine the sensors failing that quickly.
Was going to try and get the car over to Rob at needswings maybe he would be able to help.
 

Last edited by Davidm781; Jul 6, 2014 at 05:10 PM.
Reply